Wacom DTF-521 User Manual download pdf (Page 10)

Your new DTF-521

Page 8

INTERACTIVE PEN DISPLAY COMPONENTS

Your product has many features and components with which you will want to become familiar.

FRONT VIEW

The display and tablet sensor function as an integrated output and input device. The display supports

resolutions up to 1024 x 768 pixels at 16.2 million colors. The tablet sensor reports pen coordinates,

pressure, and switch information.

On Screen Display (OSD) controls

These controls, located on the upper

edge of the tablet, enable you to

adjust a variety of display settings.

See Adjusting the display on page 27

for more information.

Power LED

Lights blue when power has been supplied to the DTF-521

and a video signal is present.

Glows orange when no video signal is detected by the

DTF-521. (e.g., Your computer is turned off, starting up, or

has entered a power management mode in which video

signals are not sent.)

Power switch

Turns power to the unit on or off.

Status LED

Lights blue when the pen is in

the active area of the pen

display tablet and the pen tip

is pressed. Note that the USB

cable must also be plugged

into an active USB port before

the LED will light.

Integrated display and tablet

Use the integrated USB

ports (one located on each

side of the unit) to connect a

USB device (e.g., a USB

Flash Drive or a USB remote

controller).

Be sure to fully install the

DTF-521 hardware and

software before connecting

any other devices to the unit.

Pen tray

Provides a convenient resting place for the pen. When the display

stand is set to its lowest position, place your ﬁngers beneath the tray

(located on the bottom front edge) and slide it out.

DTF521_Manual.fm Page 8 Thursday, October 25, 2007 3:46 PM

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 59 60

Comments to this Manuals

No comments

Wacom DTF-521 User Manual Page 10

Comments to this Manuals

Related products and manuals for Graphic tablets Wacom DTF-521