Wacom DTF-521 User Manual download pdf (Page 34)

Troubleshooting

Page 32

TROUBLESHOOTING

Most of the time your pen display tablet will work ﬂawlessly. But if you are having trouble, Wacom

recommends you do the following:

1. If the Wacom tablet driver failed to load properly, ﬁrst perform the recommended action in any error

message that may appear on your screen. If that does not solve the problem, continue with the

troubleshooting procedures in this chapter.

2. If the DTF-521 does not function properly, refer to the troubleshooting section below. See also

Display troubleshooting on page 34, or look in the Pen tablet troubleshooting on page 36.

Your problem may be described there and you can try the solution offered.

3. Open the Wacom pen display Read Me ﬁle for updated information.

4. If you are having a compatibility conﬂict between the DTF-521 and a new hardware or software

product, see Obtaining driver downloads on page 42 for information on downloading an updated

software driver. Wacom periodically updates the software driver to maintain compatibility with new

products.

5. Check the FAQs (Frequently Asked Questions) on the Wacom web site for your region.

6. If you have tried the suggestions in this guide and still cannot resolve the problem, then contact

Wacom for Technical Support. See the Read Me ﬁle for information on where to obtain support for

your region.

TESTING THE DTF-521

1. If the DTF-521 power LED does not light, check the following:

• First verify that the green light on the power adapter is on. If the light is not on, check that the

power cable is properly connected to the power adapter and to an active AC outlet.

• Check that the power adapter cable is securely connected to the DTF-521 and that the

DTF-521 power switch is turned on. The DTF-521 power LED will glow orange or blue

whenever the DTF-521 is on.

Important: Use only the AC adapter that came with your pen display. Other adapters may

cause damage to your product.

2. If there is no display:

• Make sure that your computer is turned on. The power LED will light blue when the proper

video signal is received, and orange if there is no video signal or if the computer is in a power

saving mode.

• Verify that the DTF-521 is connected to an active VGA connector.

• Check that your video card has been properly installed and is functional. If you have another

display that is compatible with your video card, you can connect that display to the card in order

to verify that the video card is operating correctly.

DTF521_Manual.fm Page 32 Thursday, October 25, 2007 3:46 PM

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 59 60

No comments

Wacom DTF-521 User Manual Page 34