Wacom DTF-720 User Manual download pdf (Page 13)

The PL-720 Display

This product is in compliance with VESA and ENERGY STAR power-saving guidelines.

When connected to a Display Power Management (DPMS)-compatible computer and

graphics board, the power savings indicated below are automatically realized during

times of non-operation.

Computer

Activity

Horizontal

Synchronizing

Signal

Vertical

Synchronizing

Signal

Picture

Signal

Power

Consumption

Power Lamp

Turned On Yes Yes Yes 37W or less Blue

Stand-by Mode No Yes No Less than 2W Orange/Blue*

Suspend Mode Yes No No Less than 2W Orange/Blue*

Off Mode No No No Less than 1W Orange

* Depending on the speciﬁ cations and settings of your computer and video card, when in

standby and suspend modes, the power lamp may only light up orange.

The PL-720 Power Saving Function

In order to ensure optimal display image quality, this product utilizes the Auto-Adjust

function. When the Auto-Adjust function is operating, it may take a short time before the

screen displays properly. The settings initiated by Auto-Adjust are saved in the display.

If the Auto-Adjust function is operating, the horizontal and vertical positions as well as the phase

and pitch of the display are adjusted automatically when the display mode is received. The Auto-

Adjust function becomes operational when the horizontal frequency is in the 30-80KHz and the

vertical frequency is in the 50-75Hz range.

When the Auto-Adjust function is operating, only the power switch is operational.

Pen calibration may be necessary after adjusting screen position. (

→

P13)

The Auto-Adjust Function

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 27 28

No comments

Wacom DTF-720 User Manual Page 13