Wacom DTF-720 User Manual download pdf (Page 7)

Adjusting the Stand

Pull up on the stand adjustment lever.

Please hold the stand carefully as

you adjust it to prevent injury or

damage to the product.

Lower the stand carefully.

Caution

Installing PL-720 on a Mount Arm

This product conforms to the Video Electronics Standard Association’s (VESA) Flat

Panel Monitor Physical Mounting Interface Standard (FPMPMI).

This product can be removed from the stand and mounted on such apparatuses as

a VESA-standard mount arm. In order to do this, M4/0.7 mm screws, which are not

included with the product, are needed. Use screws that will, at the time of installation,

penetrate the surface of the product by no more than 15 mm. Use of longer screws

may result in damage to internal parts of the

product.

Make sure that both your computer and the

product are turned off and that all cables are

disconnected.

Place the display unit face down on a flat

surface. To prevent harm to the front of the

unit, ﬁ rst spread a cloth or similar material on

the ﬂ at surface as a cushion.

Remove the four screws that hold the stand to

the unit.

Using four M4/0.7mm screws, securely mount

the arm or similar apparatus to the back of the

unit.

Connect the cables and save the screws that

you removed in step 3.

Caution

When installing the unit on a mount arm or

other stand, always follow the directions in

the instruction booklet for the mount arm or

stand, as well as the instructions contained

in this document. Incorrect installation may

result in the product coming loose and falling,

possibly causing product failure.

1 2 3 4 5 6 7 8 9 10 11 12 ... 27 28

No comments

Wacom DTF-720 User Manual Page 7