Wacom CTF-220 User Manual download pdf (Page 40)

XT[2] Series DISK RECORDER

Version 10.04 - Hardware

Technical Reference Manual

Issue

10.04.A

EVS Broadcast Equipment

–

January 2011

Cable type @ 1485 Mbps @ 540 Mbps

RG59 45m / 148ft 100m / 328ft

RG6 90m / 484ft 180m / 590ft

RG11 120m / 393ft 250m / 820ft

Super HiQ 150m / 492ft 350m / 1148ft

Fiber 80km(*) 200km(*)

(*) 80km/200km is the total length of the return path, i.e. the actual distances

between the 2 servers connected via the fiber link is half of this value, i.e. 40 km

@ 1485Mbps, 100 km @ 540Mbps.

Note

When reclockers are used, the total delay induced by these reclockers

between 2 active servers on the network may not exceed 15μs.

2.8.4 STARTING XNET

1. When all above conditions are fulfilled, turn on the “Server” EVS video server

and start the Multicam application.

2. Turn on all “Masters” and “Clients” EVS video servers, and make sure the

Multicam application is started on all of them. .They should see the “Server”

on the network and they will connect automatically. Connection takes a few

seconds (usually between 2 and 5 sec) for each EVS video server.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 69 70

No comments

Wacom CTF-220 User Manual Page 40