Wacom Cintiq 20WSX Installation Guide download pdf (Page 59)

Appendix

Page 57

Using an alternate mount or stand

Cintiq can be attached to any mount arm or

stand conforming to the VESA 100 standard.

Mounting screws that are 4 mm wide with a

0.7 mm pitch (M4 Regular), with a screw

clearance depth from 13 – 18 mm are required.

To attach Cintiq to a VESA 100 mounting

platform:

1. Turn off your computer and power off

Cintiq. Then disconnect all cables from

between the unit and your computer.

2. Remove Cintiq from its stand and place it

face down on a ﬂat, soft surface (such as a

cloth spread across a desktop).

3. Remove the bearing hub by unscrewing

the four bearing hub attachment screws.

Then carefully separate the bearing halves

and remove the bearing stopper to free up

the cabling. Take care not to lose the

small bearing stopper found within the

inner groove of one of the hub sections.

Bearing hub

sections

(removed)

Attachment

screws

Cable cover

plate (removed)

Attachment

screws

Cable channel

Bearing stopper

Cintiq20WSX_Manual.fm Page 57 Monday, January 15, 2007 9:23 AM

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 71 72

No comments

Wacom Cintiq 20WSX Installation Guide Page 59